Connect your aerial
Connect your aerial cable from the aerial socket in your home, to the Aerial In/Antenna In port on the back of your box:
Connect to your TV
Connect your HDMI cable from the HDMI port on the back of your TV, to the HDMI port on the back/side of your TV:
Connect to the Internet
Connect your Ethernet cable from the Ethernet port on the back of your box, to a LAN port on the back of your router:
Router too far from your box?
To connect your box to the internet you'll need a pair of powerline adapters:
Want to know more about powerline adapters?
If you have a Wi-Fi enabled box, you can connect wirelessly to your router. For the best quality Wi-Fi signal, we recommend that the box and the router are in the same room and within 5 metres of each other.
To find out how to connect your box via Wi-Fi, check this set up guide.
Connect the power
Connect your power lead to the back of your box, and connect the plug to a wall socket:
Switch on your box
Now you've got everything connected, it's time to switch it on. Make sure the power switch on the back of the box has been turned on:
The power light on the front of the box should now turn on. Press the button on the front or top of your box (depending on model) and you should see the YouView set up screen:
Just follow the on screen instructions and you're good to go.