Time to head round the back of your box. We’ll walk you through what to do.

 First things first, we need to check how your box is connected to your router. Pick your connection: 

Direct Ethernet cable

• Check the Ethernet cable is securely connected to the Ethernet port. To be safe, disconnect and reconnect it.
• Follow the cable from your box to the back of your router and make sure it's securely connected to one of your LAN ports.

Powerline adapters

• Check the Ethernet cable is securely connected to the Ethernet port. To be safe, disconnect and reconnect it.
• There should be two powerline adapters plugged in to your mains. One by your YouView box and one by your router. Check both adapters are switched on and make sure the Ethernet cables are securely connected.

Bring up the menu with your remote

1. Select Settings*
2. From Signal & Connection select TV Channels
3. Select Retune Channels**

It can take a couple minutes to tune. Don't worry, we'll let you know when we're done.

Please note that it is not possible to manually retune the box.

If you've retuned and your signal is still on the low side, have a look through the steps in our How to improve your signal article. 

If you have any trouble with retuning your YouView box or you've lost some channels, please contact your box provider or internet service provider.

*Settings can be found via the cog in the top right corner of the Menu. You can get to the cog by pressing Up and right after opening the Menu.

We didn't think you'd end up here, but thanks for trying all the above steps.

We'd suggest contacting your service provider for further help.